爱乐透彩票官网

新闻资讯【NEWS】more>>
行业新闻

当前位置:网站首页 > 新闻资讯 > 行业新闻

  • 铝扣板有哪些安装方案
  • 本站编辑:杭州欧宏建材有限公司发布日期:2019-08-11 19:48 浏览次数:
1、根据同一水平高度装好铝修边角
2、按合适的间距吊装好吊杆和轻钢龙骨,吊杆间距小于或等于1.2米,轻钢龙骨间距是1.2米
3、把预装在三角龙骨上的吊件连同三角龙骨与轻钢龙骨成垂直方向按板材间距连接好,然后调整水平
4、将方板的两条边平行压入三角龙骨缝中,先装后横方向的两端边找直角以后拉直线逐步一排排扣压板材,每排扣完后要调整一次确保板面平整,板缝垂直。(注意方板押边带有小坑的方向是插入三角龙骨缝中)
5、扣板时要戴手套,如不慎在板面上留下污印要用清水洗干净,安装时禁止撕下保护膜
1. Aluminum trimming angle should be installed according to the same horizontal height.
 
2. Lift the suspender and light steel keel according to the appropriate distance. The distance between the suspender and light steel keel is less than or equal to 1.2 meters. The distance between the light steel keel and the light steel keel is 1.2 meters.
 
3. Connect the suspension fitted on the triangular keel with the triangular keel and the light steel keel vertically according to the plate spacing, and then adjust the level.
 
4. Press the two sides of the square plate parallel into the triangular keel seam, first install and then find the right angle at the two ends of the transverse direction, then draw a straight line and gradually press the plates in rows. After each row of buttons is finished, adjust once to ensure that the surface of the plate is flat and the seams are vertical. (Note that the direction of the small pit on the side of the square plate is inserted into the triangular keel seam)
 
5. Wear gloves when fastening the board. If improper stains are left on the board, wash them with clean water. Do not tear down the protective film when installing.
 
 
友情链接:宏发彩票官网  永盛彩票网  永盛彩票网  永盛彩票网  永盛彩票网  永盛彩票  宏发彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!